Drills and Drill Bits
Grainger Face Mill MFPN 453000R5T MFPN 300
The Kyocera Face Mill is a high-performance milling cutter designed for face milling a wide range of materials. It features a 45 degree lead angle and variable helix flutes to provide smooth cutting action and good chip control. The cutter body is made of micro-grain carbide for wear resistance and coated with TiAIN to further enhance tool life. It has 6 flutes and is available in diameters ranging from 1" to 4". The maximum depth of cut is 0.787" and the maximum feed rate is 0.0039" per tooth. The face mill is balanced to G2.5 at 25,000 RPM and provides accurate, chatter-free milling in a wide range of applications.
Grainger Threading Tool 3/8 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/8 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 5 inches and it has an American National Standard Stub Acme thread. This durable tool is made in the USA and well-suited for production threading applications.
Grainger Face Mill FM 300090RH FM 300 Dia
The Kyocera Indexable Face Mill is a 3" diameter face milling cutter with a maximum depth of cut of 0.315". It has 4 indexable carbide inserts with a TiAlN coating for wear resistance. The cutter body is made of steel and has a BT30 toolholder shank. It is capable of face milling, slotting and side milling operations. The maximum spindle speed is 4000 RPM.
Grainger Thread Mill Carbide
The Micro 100 16R775 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill with a right hand spiral flute. It has a TiAlN coating and can cut 60-62 HRC materials. The thread mill has a 1/4"-28 UNF shank and can cut thread sizes from #10-24 UNF to 1/4"-28 UNF. It has AlTiN nano coating for wear resistance and increased tool life. The thread mill body is made of micrograin carbide with high cobalt content for strength and heat resistance. It can machine a variety of materials including steel, stainless steel, cast iron, aluminum, titanium and high temp alloys. It is designed for high performance threading in production environments.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 3 inches and it has an American National Standard Stub Acme thread. This durable tool is made in the USA and well-suited for production threading applications.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 3 inches and it has an American National Standard Stub Acme thread. This durable tool is made in the USA and well-suited for production threading applications.
Grainger End Mill Kyocera EM 1250AL 1.2500 Dia
The Kyocera 170HC8 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAlN coating for increased hardness and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, profiling, and contouring in steels and cast irons. The end mill features Kyocera's KY2000 coating for high abrasion resistance.
Grainger Threading Tool 3/8 Carbide
The Micro 100 3/8" shank threading tool is a high speed steel insert style threading tool with a 3/8" shank diameter. It has a 60 degree threading insert that can cut unified, metric, acme, buttress, and worm threads. The insert is made of C2 grade carbide for wear resistance and toughness. This threading tool allows quick insert changes and reduced downtime. It is suitable for production threading applications in steels, cast iron, stainless steel, aluminum and other materials. The tool provides accurate threading starts and excellent surface finishes.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 3 inches and it has an American National Standard Stub Acme thread. This durable tool is made in the USA and well-suited for production threading applications.
Grainger Cor Rad End Mill 3/32 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in multiple lengths from 1/2 inch to 2 inches. The end mill has 4 flutes and can be run at speeds up to 12,000 RPM. It is designed for general purpose milling in steels, stainless steels, cast iron, aluminum and other non-ferrous materials. The end mill features TiAlN coating for increased tool life and improved chip flow. It produces a smooth corner radius on the workpiece.
Grainger Cor Rad End Mill 1/8 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in multiple lengths from 1/2 inch to 2 inches. The end mill has 4 flutes and can be run at speeds up to 12,000 RPM with feed rates from 0.001 to 0.004 IPR. It is designed for general purpose milling in steel, stainless steel, cast iron, aluminum and other non-ferrous metals. The end mill features a TiAlN coating for increased tool life and heat resistance. It produces a smooth corner radius on parts.
Grainger Threading Tool 1/2 Carbide
The Grainger 16T192 is a 16-ton hydraulic bottle jack made by Hein-Werner. It has a lifting range of 10-3/8 inches to 16-1/4 inches and a lowered height of 9-3/8 inches. This hydraulic jack has a two-piece handle for easy pumping and is designed for use on hard level surfaces. The 16T192 bottle jack is rated for 16 tons (32,000 lbs) capacity. It meets ASME PALD standards and comes with a one year warranty from Hein-Werner. This is an industrial grade hydraulic bottle jack suitable for automotive or industrial lifting applications.
Grainger Face Mill MFWN 903000R4T M-SIX 300
The Kyocera Face Mill is a high-performance face milling cutter designed for high-speed machining of aluminum and non-ferrous metals. It features a 2-flute design with replaceable carbide inserts that provide a smooth finish and long tool life. The cutter body is made of heat-treated alloy steel for rigidity and durability. It has a 1" arbor hole and is available in diameters ranging from 1" to 4". The cutter can achieve surface speeds up to 13,000 SFM and feed rates up to 0.004 IPR. With its rigid construction and sharp cutting edges, this face mill is ideal for facing, slotting, side milling, and contouring operations where an excellent finish is required.
Grainger Threading Tool 5/16 Carbide
The Micro 100 Threading Tool is a high-speed steel threading tool with a 5/16 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 5 inches and it has an American National Standard stub Acme thread. This durable tool is made in the USA and well-suited for production threading applications.
